"%1" is not a recognized transformation type. Supported transformation types are dita, eclipsehelp, html5, htmlhelp, markdown, markdown_gitbook, markdown_github, pdf, pdf2, xhtml. Input file is not specified, or is specified using the wrong parameter. Input file '%1' cannot be located or read. Ensure that file was specified properly and that you have permission to access it. Cannot find the user specified XSLT stylesheet '%1'. Invalid DITA topic extension '%1'. Supported values are '.dita' and '.xml'. Argument "%1" is deprecated. This argument is no longer supported in the toolkit. Argument "%1" is deprecated. Please use the argument "%2" instead. Cannot find the specified DITAVAL '%1'. Attribute @%1 is deprecated. Use attribute @%2 instead. > Failed to create new instance for '%1'. Please ensure that '%1' exists and that you have permission to access it. Duplicate condition in filter file for rule '%1'. The first encountered condition will be used. Duplicate condition in filter file for rule '%1'. The first encountered condition will be used. Duplicate condition in filter file for rule '%1'. The first encountered condition will be used. Cannot overwrite file '%1' with file '%2'. The modified result may not be consumed by the following steps in the transform pipeline. Check to see whether the file is locked by some other application during the transformation process. Failed to parse the input file '%1'. Failed to parse the referenced file '%1'. Found an indexterm element with no content. Setting the term to ***. Log file '%1' was generated successfully in directory '%2'. Any messages from the transformation process are available in the log file; additional details about each message are available in the DITA-OT documentation. At least one plug-in in '%1' is required by plug-in '%2'. Plug-in '%2' cannot be loaded. Check and see whether all prerequisite plug-ins are installed in toolkit. File '%1' will not generate output since it is invalid or all of its content has been filtered out by the ditaval file. Please check the file '%1' and the ditaval file to see if this is the intended result. File '%1' will not generate output because because all content has been filtered out by DITAVAL "exclude" conditions, or because the file is not valid DITA. Failed to parse the input file '%1' because all of its content has been filtered out. This will happen if the input file has filter conditions on the root element, and a ditaval excludes all content based on those conditions. Failed to get the specified image file '%1', so it will not be included with your output. The input to the "topic merge" transform process could not be found. Correct any earlier transform errors and try the build again, or see the DITA-OT documentation for additional causes. The "topic merge" did not generate any output. Correct any earlier transform errors and try the build again, or see the DITA-OT documentation for additional causes. No format attribute was found on a reference to file '%1', which does not appear to be a DITA file. If this is not a DITA file, set the format attribute to an appropriate value, otherwise set the format attribute to "dita". No 'domains' attribute was found for element '<%1>'. This generally indicates that your DTD or Schema was not developed properly according to the DITA specification. No 'class' attribute for was found for element '<%1>'. The element will be processed as an unknown or non-DITA element. No specified rule for '%1' was found in the ditaval file. This value will use the default action, or a parent prop action if specified. To remove this message, you can specify a rule for '%1' in the ditaval file. No valid content is found in topicref '%1' during chunk processing. Please specify an existing and valid topic for the topicref. Failed to parse the input file '%1' (the content of the file is not valid). If the input file '%1' does not have a DOCTYPE declaration, please make sure that all class attributes are present in the file. The file "%1" is outside the scope of the input dita/map directory. If you want to lower the severity level, please use the Ant parameter 'outer.control', and set the value to "warn" or "quiet". Otherwise, move the referenced file "%1" into the input dita/map directory. The file "%1" is outside the scope of the input dita/map directory. The XML schema and DTD validation function of the parser is turned off. Please make sure the input is normalized DITA with class attributes included, otherwise it will not be processed correctly. The tag "%1" is specialized from unrecognized metadata. Please make sure that tag "%1" is specialized from an existing metadata tag in the core DITA vocabulary. There is no target specified for conref push action "pushafter". Please add <elementname conref="pushtarget" conaction="mark"> before current element. An element uses the attribute conaction="replace", but a conref attribute is not found in the expected location. The attribute conref="%1" uses invalid syntax. The value should contain '#' followed by a topic or map ID, optionally followed by '/elemID' for a sub-topic element. Two elements both use conref push to replace the target "%1". Please delete one of the duplicate "replace" actions. The conref push function is trying to replace an element that does not exist (element "%1" in file "%2"). There is a redundant conref action "pushbefore". Please make sure that "mark" and "pushbefore" occur in pairs. The key "%1" is defined more than once in the same map file. Conkeyref="%1" can not be resolved because it does not contain a key or the key is not defined. The build will use the conref attribute for fallback, if one exists. Unable to find key definition for key reference "%1" in root scope. The href attribute may be used as fallback if it exists Unable to find key definition for key reference "%1" in scope "%2". The href attribute may be used as fallback if it exists The attribute value %1="%3" on element "%2" does not comply with the specified subject scheme. According to the subject scheme map, the following values are valid for the %1 attribute: %4 Found an <index-see> or <index-see-also> reference to the term '%1', but that term is not defined in the index. Unable to load target for coderef "%1". Code reference charset "%1" not supported. See the DITA-OT documentation for supported charset values on the format attribute. Input file '%1' is not valid DITA file name. Please check '%1' to see if it is correct. The extensions ".dita" or ".xml" are supported for DITA topics. Unable to parse invalid %1 attribute value "%2" Invalid key name "%1". Invalid xml:lang "%1". The id attribute value "%1" is not unique within the topic that contains it. Both %1 and %2 attributes defined. A single element may not contain both generalized and specialized values for the same attribute. Invalid key scope name "%1". Key "%1" was used in conkeyref but is not bound to a DITA topic or map. Cannot resolve conkeyref value "%2" as a valid conref reference. Topic reference target is a DITA map but format attribute has not been set. Set format attribute value to "ditamap". Invalid %1 attribute value "%2". The cols attribute is "%1" but number of colspec elements was %2. Chunk attribute uses both "to-content" and "by-topic" that conflict with each other. Ignoring "by-topic" token. Branch filter generated topic %1 used more than once. Renaming %1 to %2. No id attribute on topic type element %1. Using generated id %2. No id attribute on topic type element %1. Conref action "mark" without conref target. Circular key definition %1. Invalid 'class' attribute '%1' for was found for element '<%2>'. The element will be processed as an unknown or non-DITA element. Cannot find the specified DITAVAL '%1'. Email link without correct 'format' attribute. Using 'format' attribute value 'email'. Email link without correct 'scope' attribute. Using 'scope' attribute value 'external'. Rev attribute cannot be used with prop filter. Absolute link '%1' without correct 'scope' attribute. Using 'scope' attribute value 'external'. Absolute link '%1' without correct 'scope' attribute. Invalid action attribute '%1' on DITAVAL property. Input file '%1' could not be loaded. Ensure that grammar files for this document type are referenced and installed properly. File '%1' could not be loaded. Ensure that grammar files for this document type are referenced and installed properly. Integrator configuration '%1' has been deprecated. Use plugin configuration '%1' instead. Ignoring empty conref attribute conref="". Processing table cell failed. The resource referenced as %1 is capitalized differently on disk No string named '%1' was found for language '%2'. Using the default language '%3'. Add a mapping between default language and desired language for the string '%1'. The title element or attribute in the ditamap is required for Eclipse output. The anchorref attribute should either reference another dita map or an Eclipse XML TOC file. The value '%1' does not appear to reference either. Found a navref element that does not reference anything. The navref element should either reference another dita map or an Eclipse XML file. Unable to find navigation title for reference to '%1'. The build will use '%1' as the title in the Eclipse Table of Contents. Unknown file extension in href="%1". References to non-DITA resources should set the format attribute to match the resource (for example, 'txt', 'pdf', or 'html'). Only DITA topics, HTML files, and images may be included in your compiled CHM file. The reference to "%1" will be ignored. To remove this message, you can set the toc="no" or processing-role="resource-only" attribute on your topicref. File '%1' cannot be loaded, and no navigation title is specified for the table of contents. File '%1' does not exist or cannot be loaded. Could not retrieve a title from '%1'. Using '%2' instead. Unable to find target for conref="%1". There is more than one possible target for the reference conref="%1". Only the first will be used. Remove the duplicate id in the referenced file. When you conref another topic or an item in another topic, the domains attribute of the target topic must be equal to or a subset of the current topic's domains attribute. Put your target under an appropriate domain. You can see the messages guide for more help. A element with attribute conref="%1" indirectly includes itself, which results in an infinite loop. The attribute conref="%1" uses invalid syntax. Conref references to a map element should contain '#' followed by an ID, such as mymap.ditamap#mytopicrefid. The attribute conref="%1" uses invalid syntax. The value should contain '#' followed by a topic or map ID, optionally followed by '/elemID' for a sub-topic element. A reference to "%2" appears to reference a DITA document, but the format attribute has inherited a value of "%1". The document will not be processed as DITA. Found a link or cross reference with an empty href attribute (href=""). Remove the empty href attribute or provide a value. The type attribute on a topicref was set to '%1', but the topicref references a more specific '%2' topic. Note that the type attribute cascades in maps, so the value '%1' may come from an ancestor topicref. The type attribute on a topicref was set to '%1', but the topicref references a '%2' topic. This may cause your links to sort incorrectly in the output. Note that the type attribute cascades in maps, so the value '%1' may come from an ancestor topicref. Missing navtitle attribute or element for peer topic "%1". References must provide a local navigation title when the target is not a local DITA resource. Missing navtitle attribute or element for non-DITA resource "%1". References must provide a local navigation title when the target is not a local DITA resource. Unable to retrieve navtitle from target: '%1'. Using linktext (specified in topicmeta) as the navigation title. Unable to retrieve navtitle from target: '%1'. Missing linktext and navtitle for peer topic "%1". References must provide a local navigation title when the target is not a local DITA resource. Missing linktext and navtitle for non-DITA resource "%1". References must provide a local navigation title when the target is not a local DITA resource. Unable to retrieve linktext from target: '%1'. Using navigation title as fallback. Unable to retrieve linktext from target: '%1'. Link or cross reference must contain a valid href or keyref attribute; no link target is specified. The type attribute on a %1 element was set to %3, but the reference is to a more specific %4 %2. This may cause your links to sort incorrectly in the output. The type attribute on a %1 element was set to %3, but the reference is to a %4 %2. This may cause your links to sort incorrectly in the output. The file %1 is not available to resolve link information. Unable to retrieve link text from target: '%1'. If the target is not accessible at build time, or does not have a title, provide the link text inside the reference. Unable to generate link text for a cross reference to a list item: '%1' Unable to generate link text for a cross reference to an undered list item: '%1' Unable to generate the correct number for a cross reference to a footnote: '%1' Unable to generate link text for a cross reference to a dlentry (the dlentry or term could not be found): '%1' No title found for this document; using "***" in XHTML title bar. The longdescref attribute on tag '%1' will be ignored. Accessibility for object elements needs to be handled another way. Required cleanup area found. To remove this message and hide the content, build your content without using the DRAFT parameter. Draft comment area found. To remove this message and hide the comments, build your content without using the DRAFT parameter. Found more than one title element in a %1 element. Using the first one for the %1's title. DITAVAL based flagging is not currently supported for inline phrases in XHTML; ignoring flag value on '%1' attribute. The link to '%1' may appear more than once in '%2'. The area element in an image map does not specify a link target. Please add an xref element with a link target to the area element. The area element in an image map should specify link text for greater accessibility. Link text should be specified directly when the target is not a local DITA resource. Area shape should be: default, rect, circle, poly, or blank (no value). The value '%1' is not recognized. Area coordinates are blank. Coordinate points for the shape need to be specified. References to non-dita files will be ignored by the PDF, ODT, and RTF output transforms. Default id "org.sample.help.doc" is used for Eclipse plug-in. If you want to use your own plug-in id, please specify it using the id attribute on your map. No string named '%1' was found when creating generated text; using the value '%1' in your output file. A element that references another map indirectly includes itself, which results in an infinite loop. The original map reference is to '%1'. Conflict text style is applied on the current element based on DITAVAL flagging rules. Please check ditaval and dita source to make sure there is no style conflict on the element which needs to be flagged. Customized stylesheet uses deprecated template "flagit". Conditional processing is no longer supported using this template. Please update your stylesheet to use template "start-flagit" instead of deprecated template "flagit". The file '%1' is not available to resolve link information. The link or cross reference target '%1' cannot be found, which may cause errors creating links or cross references in your output file. No glossary entry was found associated with key '%1' on %2 element. The build will try to determine the best display text and hover text for terms and abbreviations. Key '%1' was used in an abbreviated-form element, but the key is not associated with a glossary entry. Abbreviated-form should ONLY be used to reference to a glossary entry. ID '%1' was used in topicref tag but did not reference a topic element. The href attribute on a topicref element should only reference topic level elements. It appears that this document uses constraints, but the conref processor cannot validate that the target of a conref is valid. To enable constraint checking, please upgrade to an XSLT 2.0 processor. The dita document '%1' is linked to from your content, but is not referenced by a topicref tag in the ditamap file. Include the topic in your map to avoid a broken link. The copy-to attribute [copy-to="%1"] uses the name of a file that already exists, so this attribute is ignored. Two unique source files each specify copy-to="%2", which results in a collision. The value associated with href="%1" is ignored. Template "%1" is deprecated. Remove references to this template from your custom XSLT or plug-ins. No string named '%1' was found for language '%2'. Add a mapping for the string '%1'. A topicref element that references a map contains child topicref elements. Child topicref elements are ignored. Template mode "%1" is deprecated. Remove references to this template mode from your custom XSLT or plug-ins. Target "%1" is deprecated. Remove references to this target from your custom Ant files. Parameter "%1" on template "%2" is deprecated. Use parameter "%3" instead. Conref range: Unable to find conref range end element with ID "%1". Ignoring navtitle within topicgroup. Removing broken link to "%1". No formatting defined for unknown class attribute value "%1". A content reference in a constrained document type is pulling content from an unconstrained document type. The reference will resolve, but may result in content that violates one of the document constraints in "%1". A content reference in a constrained document type cannot be resolved because it would violate one of the document constraints "%1". The current constrained document may only reuse content from documents with equivalent constraints. Absolute paths on the local file system are not supported for the CSSPATH parameter. Please use a relative path or full URI instead. Cannot find the running-footer file "%1". Please double check the value to ensure it is specified correctly. Cannot find the running-header file "%1". Please double check the value to ensure it is specified correctly. Cannot find the specified heading file "%1". Please double check the value to ensure it is specified correctly. Target "%1" is deprecated. Remove references to this target from your custom XSLT or plug-ins. In order to include peer or external topic '%1' in your help file, you may need to recompile the CHM file after making the file available. Index entry '%1' will be sorted under the "Special characters" heading. The PDF indexing process could not find the proper sort location for '%1', so the term has been dropped from the index. The build failed due to problems encountered when sorting the PDF index. Cannot find the user specified XSLT stylesheet '%1'. The PDF indexing process could not find the proper sort location for '%1', so the term has been dropped from the index. The build failed due to problems encountered when sorting the PDF index. Please address any messages located earlier in the log. Index entry '%1' will be sorted under the "Special characters" heading. %1 %1 %1 Ignoring index-see '%1' inside parent index entry '%2' because the parent indexterm contains indexterm children. Ignoring index-see-also '%1' inside parent index entry '%2' because the parent indexterm contains indexterm children. There is an index term specified with start="%1", but there is no matching end for this term. Add an index term in a valid location with end="%1". There are multiple index terms specified with start="%1", but there is only one term to end this range, or the ranges for this term overlap. Ensure that each term with this start value has a matching end value, and that the specified ranges for this value do not overlap There are multiple index entries found to close the index range for "%1". Ensure that any index term with start="%1" has only one matching end term with end="%1". A topic reference was found with href="". Please specify a target or remove the href attribute. The topic reference href="%1" could not be found. Please correct the reference, or set the scope or format attribute if the target is not a local DITA topic. Found an index term with end="%1", but no starting term was found for this entry. Font definition not found for the logical name or alias '%1'. Attribute set reflection cannot handle XSLT element %1. The index term '%2' uses both an index-see element and %1 element. Convert the index-see element to index-see-also. Found a table row with more entries than allowed. The PDF file '%1' could not be generated.