81 lines
6.3 KiB
INI
Executable file
81 lines
6.3 KiB
INI
Executable file
; See comskip.txt in the distribution zip file for many settable parameters, read manual.html, tuning.html and debugwindow.html for how to tune and debug comskip
|
|
edl_mode=3 ; the mode specified in the generated edl file, 0=cut, 3=commercial break
|
|
mkv_time_offset=30.0 ; offset in seconds, to work around what appears to be an xbmc or ffmpeg bug
|
|
always_keep_first_seconds=2 ; xbmc/vdpau has a bug that causes a segfault if we don't keep the start of the stream, I'll fix that when I get a chance
|
|
detect_method=255 ;1=black frame, 2=logo, 4=scene change, 8=fuzzy logic, 16=closed captions, 32=aspect ration, 64=silence, 128=cutscenes, 255=all
|
|
validate_silence=1 ; Default, set to 0 to force using this clues if selected above.
|
|
validate_uniform=1 ; Default, set to 0 to force using this clues (like pure white frames) if blackframe is selected above.
|
|
validate_scenechange=1 ; Default, set to 0 to force using this clues if selected above.
|
|
verbose=10 ;show a lot of extra info, level 5 is also OK, set to 0 to disable
|
|
max_brightness=60 ;frame not black if any pixels checked are greater than this (scale 0 to 255)
|
|
test_brightness=40 ;frame not pure black if any pixels checked are greater than this, will check average brightness (scale 0 to 255)
|
|
max_avg_brightness=25 ;maximum average brightness for a dim frame to be considered black (scale 0 to 255) 0 means autosetting
|
|
max_commercialbreak=600 ;maximum length in seconds to consider a segment a commercial break
|
|
min_commercialbreak=25 ;minimum length in seconds to consider a segment a commercial break
|
|
max_commercial_size=125 ;maximum time in seconds for a single commercial or multiple commercials if no breaks in between
|
|
min_commercial_size=4 ;mimimum time in seconds for a single commercial
|
|
min_show_segment_length=250 ; any segment longer than this will be scored towards show.
|
|
non_uniformity=500 ; Set to 0 to disable cutpoints based on uniform frames
|
|
max_volume=500 ; any frame with sound volume larger than this will not be regarded as black frame
|
|
min_silence=12 ; Any deep silence longer than this amount of frames is a possible cutpoint
|
|
ticker_tape=0 ; Amount of pixels from bottom to ignore in all processing
|
|
logo_at_bottom=0 ; Set to 1 to search only for logo at the lower half of the video, do not combine with subtitle setting
|
|
punish=0 ; Compare to average for sum of 1=brightness, 2=uniform 4=volume, 8=silence, 16=schange, set to 0 to disable
|
|
punish_threshold=1.3 ; Multiply when amount is above average * punish_threshold
|
|
punish_modifier=2 ; When above average * threshold multiply score by this value
|
|
intelligent_brightness=0 ; Set to 1 to use a USA specific algorithm to tune some of the settings, not adviced outside the USA
|
|
logo_percentile=0.92 ; if more then this amount of logo is found then logo detection will be disabled
|
|
logo_threshold=0.775
|
|
punish_no_logo=1 ; Default, set to 0 to avoid show segments without logo to be scored towards commercial
|
|
aggressive_logo_rejection=0
|
|
connect_blocks_with_logo=0 ; set to 1 if you want successive blocks with logo on the transition to be regarded as connected, set to 0 to disable
|
|
logo_filter=0 ; set the size of the filter to apply to bad logo detection, 4 seems to be a good value.
|
|
logo_max_percentage_of_screen=0.9
|
|
subtitles=1
|
|
cut_on_ar_change=1 ; set to 1 if you want to cut also on aspect ratio changes when logo is present, set to 2 to force cuts on aspect ratio changes. set to 0 to disable
|
|
delete_show_after_last_commercial=0 ; set to 1 if you want to delete the last block if its a show and after a commercial
|
|
delete_show_before_or_after_current=0 ; set to 1 if you want to delete the previous and the next show in the recording, this can lead to the deletion of trailers of next show
|
|
delete_block_after_commercial=0 ;set to max size of block in seconds to be discarded, set to 0 to disable
|
|
remove_before=0 ; amount of seconds of show to be removed before ALL commercials
|
|
remove_after=0 ; amount of seconds of show to be removed after ALL commercials
|
|
shrink_logo=0 ; Reduce the duration of the logo with this amount of seconds
|
|
after_logo=0 ; set to number of seconds after logo disappears comskip should start to search for silence to insert an additional cutpoint
|
|
padding=0
|
|
ms_audio_delay=5
|
|
volume_slip=40
|
|
skip_b_frames=0 ; Set to 1 to force Comskip to skip frames for higher processing speed.
|
|
max_repair_size=200 ; Will repair maximum 200 missing MPEG frames in the timeline, set to 0 to disable repairing for players that don't use PTS.
|
|
disable_heuristics=4 bit pattern for disabling heuristics, adding 1 disables heristics 1, adding 2 disables heristics 2, adding 4 disables heristics 3, 255 disables all heuristics
|
|
delete_logo_file=0 ; set to 1 if you want comskip to tidy up after finishing
|
|
output_framearray=0 ; create a big excel file for detailed analysis, set to 0 to disable
|
|
output_data=0 ; create a dump of the user data channel, used for CC and XDS (such as V-Chip info). Can be use together with output_framearray to remote debug CC decoding
|
|
output_videoredo=0
|
|
output_womble=0
|
|
output_mls=0 ; set to 1 if you want MPeg Video Wizard bookmark file output
|
|
output_cuttermaran=0
|
|
output_mpeg2schnitt=0
|
|
output_mpgtx=0
|
|
output_dvrcut=0
|
|
output_zoomplayer_chapter=0
|
|
output_zoomplayer_cutlist=0
|
|
output_edl=0
|
|
output_dvrmstb=0 ; Set to 1 if you're running DVRMS-Toolbox
|
|
output_edlx=0
|
|
output_vcf=0
|
|
output_bsplayer=0
|
|
output_btv=0 ; set to 1 if you want Beyond TV chapter cutlist output
|
|
output_projectx=0 ; set to 1 if you want ProjectX cutlist output (Xcl)
|
|
output_avisynth=0
|
|
output_vdr=1 ; set to 1 if you want XBMC to skipping commercials
|
|
output_demux=0 ; set to 1 if you want comskip to demux the mpeg file while scanning
|
|
sage_framenumber_bug=0
|
|
sage_minute_bug=0
|
|
live_tv=0 ; set to 1 if you use parallelprocessing and need the output while recording
|
|
live_tv_retries=4 ; change to 16 when using live_tv in BTV, used for mpeg PS and TS
|
|
dvrms_live_tv_retries=300 ; only used for dvr_ms
|
|
standoff=0 ; change to 8000000 when using live_tv in BTV
|
|
cuttermaran_options="cut=\"true\" unattended=\"true\" muxResult=\"false\" snapToCutPoints=\"true\" closeApp=\"true\""
|
|
mpeg2schnitt_options="mpeg2schnitt.exe /S /E /R25 /Z %2 %1"
|
|
avisynth_options="LoadPlugin(\"MPEG2Dec3.dll\") \nMPEG2Source(\"%s\")\n"
|
|
dvrcut_options="dvrcut \"%s.dvr-ms\" \"%s_clean.dvr-ms\" "
|
|
windowtitle="Comskip - %s"
|